Asbestos removal is certainly a sensitive undertaking, which requires high precautionary standards. The preparation phase is specially essential in avoiding adverse health effects on workers and house occupants.
This is a simple guideline that a qualified specialist would follow in readiness for elimination of friable products (asbestos containing material in powder form), based on information in the Australian Department of your practice, Employment and Workplace Relations:
1. Preparation For Removal Project
Prior to deciding to attempt to do anything, you have to follow these preparatory procedures:
- You should first obtain an asbestos removal control plan (ARCP), along with the work instructions.
- To guarantee the highest standards of safety and compliance of the project, an on-site assessment should be accomplished. Relevant data may also be sourced from a preexisting asbestos register.
- It is necessary that calculations are made from the specified amount of materials, in line with the quality requirements, specifications and plans.
- Applicable environmental requirements should be identified so your project can abide by all regulatory obligations.
- The fitness of workers mixed up in project has to be preserved. Therefore, you should apply all processes required by meeting health surveillance requirements. This too involves air monitoring.
- Authorization are able to be obtained (determined by company and legislative requirements) after finishing the preparation phase.
- All workers involved in the project needs to be provided with personal protective equipment (PPE) that is certainly in conjuction with the job. Such equipment needs to be checked for faults beforehand.
2. Preparation Of Removal Area And Site
After the project has been authorized, pursuing the initial preparation phase, an extra preparation of the particular web site is necessary. This calls for the subsequent activities:
� The specific materials containing asbestos should be identified as well as the asbestos register checked.
� Having identified the mark materials, after that you can implement signage and barricade procedures. This is necessary in delineating work areas from the site; hence preventing unwarranted access by unqualified persons.
� Obviously, you should also create the decontamination unit before starting the job.
� In addition, you have to test the decontamination procedures, just to be sure of their effectiveness, while ruling out likelihood of error.
� Similarly, all equipment and materials that is to be utilized in eliminating asbestos containing material (ACM) must be checked ahead of the operation.
� It's critically important that adjacent utilities are assessed beforehand. Such utilities as utility lines and water pipes may require deactivation, containment or diversion. It will avert avoidable risks.
� The code of practice and applicable legislation would also need you to notify all occupants in the building, neighbors and then any one else who could possibly be afflicted with the operation.
3. Enclosing The Removal Site
This is the last step linked to preparation to the removal project. Various activities involved include:
- You ought to know the most appropriate enclosure type and removal process, for that extensive the removal project is.
- Since friable items are potentially more harmful than non-friable products (ACM in solid form), stricter enclosure procedures can be required.
- After a particular enclosure type is selected, you have to make certain that negative air pressure is maintained there, in compliance with legislative requirements. It should also be inspected and smoke tested to make certain that it is absolutely air-tight.
- After completing all these preparatory procedure, a licensed assessor ought to be notified in the proposed asbestos removal project.